95-5 lead-free solid wire tin-antimony solder is a low temperature lead-free solder with a narrow melting range. It is primarily used for copper plumbing tubes, but can be used for other general soldering applications. The rapid melting characteristics require close fitting connections as it is difficult “bridge” or fill wide clearances. Conforms with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content requirements for “lead-free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws, and the US Safe Drinking Water Act amendments effective January 2014. Conforms to the EU Reach & RoHS directive.
Features
- Low temperature lead-free solder with a narrow melting range
- Recommended for lead-free installation of smaller diameter, tight fitting connections
- Ideal for soldering copper plumbing tubes
- Well suited for applications where moderately elevated temperature is a factor
- Higher electrical conductivity and high fluidity
- Meets NSF/ANSI Standard 61 for drinking water system components – health effects; Meets NSF/ANSI 372 for drinking water system components – lead content
- Not recommended for use on brass or HVAC connections
Applications
- Soldering copper plumbing tube or general soldering applications
Specifications
- Country of Origin : US
- Chemical Composition : Antimony 4.5%-5.5%;Tin Remainder%
- Classification : ASTM B32 Alloy Sb-5
- Color : Bright Silver
- Diameter : .118″ (3mm)
- Electrical Conductivity (%IACS) : 11.9
- Liquidus : 464°F (240°C)
- Made in USA : Yes
- Material : Lead-free Solder
- NSF Compliant : Yes
- NSF Specification : NSF/ANSI Standard 61;NSF/ANSI 372
- Recommended Flux : Bridigit° Burn Resistant Flux;Bridgit° Water Soluble Flux (ASTM B813);Stay-Clean° Paste Soldering Flux;Stay-Clean° Liquid Soldering Flux (for steel or ferrous base metals). Remove flux residue after soldering.
- RoHS Compliant : Yes
- Size : 1 ea.
- Solidus : 452°F (233°C)
- Warranty : 1 Year
