Availability: 6 in stock
A high purity line regulator for use with non-corrosive or semi-corrosive gases including dichlorosilane, ammonia, or amines in high flow applications.
• Point-of-use regulation of gases in high purity, high flow applications (up to 730 SCFH)
• High-purity 316L stainless steel body
• 316 stainless steel diaphragm
• Metal to metal seals minimize diffusion of contaminants
• 2” delivery pressure gauge
• Bonnet ported and threaded to pipe gases away from work area
• Equipped with outlet diaphragm valve
• 1/4” compression tube inlet/outlet connection
• Porous metal filter protects seat from contamination
• Bonnet threaded for panel mounting
• Body screw thread tapped for back mounting
| Part Number | Max Delivery Pressure |
Delivery Pressure Gauge |
| SEQ3452 | 30 psi | 30″-0-60 psi |
| SEQ3454 | 100 psi | -30″-0-200 psi |
• Gauges: 316 stainless steel
• Body: 316L stainless steel
• Bonnet: Stainless steel
• Diaphragm: 316 stainless steel
• Seat: Teflon
• Seals: Metal to metal
• Maximum Inlet Pressure: 500 psi (3,450 kPa)
• Maximum Flow Rate (At 500 psi, N2):
Model 3452: 900 SCFH (425 SLPM)
Model 3454: 1800 SCFH (850 SLPM)
• Flow Capacity (Cv): 0.6
• Operating Temperature: -40°F to 165°F (-40°C to 74°C)
• Flow Direction: Right to Left
• Inlet/Outlet Fittings: 1/4” Compression
• Porting (Regulator Body): 1/4” NPT Female
• Porting Configuration: 1 High, 2 Low
| Mounting Options | |||
| Mounting Bracket for Regulators Mounting Nuts are also needed (see below). The regulator knob will have to be removed in order to mount on this bracket. |
|||
| Mounting Nuts These nuts can be used either with the above bracket or for mounting in a panel. |
